Idk what or why this happaned but i fixed it. I would like to know if anyone can tell me why this happened . So....... I installed windows into the ssd without my hdd plugged in and everything was fine. When i tried booting it up after plugging in hdd nothing would happen the screen would go blank and yes the ssd was first priority.I think my sata cables were plugged in wrong cus I had a sata 6gb in a sata express port so i fixed that but the screen still went blank. I heard the optical drive making a lot of sound so i took out the blu ray installation cd that was in there. Then when i rebooted everything worked fine????? was the optical drive doing something it shouldn't have or was it the cables. There is another thing i would like to ask about.... I went into windows and the hdd was there it wasn't unallocated (because i already fixed that) i could see it on the desktop, but when i went back into the bios there was no hdd option in the boot priority only the ssd so is the hdd supposed to be in there somewhere or not supposed to be in there?.....Sorry if i said something stupid this is my first build
Hard drive and Optical problems or maybe not?
- Thread starter Rohit1234
- Start date
TRENDING THREADS
-
-
News Windows 11 will reportedly display a watermark if your PC does not support AI requirements- Started by Admin
- Replies: 18
-
Question Can I plug a docking station to a USB-C 2.0 port to have video output?- Started by jameli
- Replies: 2
-
Facebook
Twitter
Instagram