Can't wake pc after putting to sleep mode

ig_88

Reputable
Feb 15, 2015
18
0
4,510
I have been trying to overclock my pc and I've noticed that every time I run the cpu frequency above 100mhz and start the computer it works initially. I pass a 5 hr test of prime95 (small FFTs) but if I put it to sleep I cant get it to wake up.
However my mouse (wired) will light up and act as though the pc is on. My keyboard doesn't respond. I have also been touching the memory clock on my gpu, but the pc starts no matter what I do to the gpu.

specs:
athlon 860k (running at 100mhz freq and 37 mult)
gigabyte a88x d3h
powercolor r9 270
 

ig_88

Reputable
Feb 15, 2015
18
0
4,510
also I've noticed that the system takes longer(about 10-15 sec) to go to sleep when cpu frequency is above 100mhz and then is unresponsive
 

ig_88

Reputable
Feb 15, 2015
18
0
4,510
alright:
cpu: athlon x4 860k at 3.7ghz
cpu cooler: cooler master hyper tx3 g1
mobo: gigabyteGA-F2A88X-D3H (rev. 3.1)
ram: Team Elite 1x8 GB running at 1333 mhz
gpu: PowerColor TurboDuo AXR9 270 2GBD5-TDHE/OC running at stock
hard drive:Seagate Barracuda ST1000DM003 1TB 7200 RPM
psu: antec VP 450W 80+ bronze
case: fractal design core 1000 mATX usb 3.0

I usually do a keyboard space click to get it going put I will try the mouse click after more suggestions
 

ig_88

Reputable
Feb 15, 2015
18
0
4,510
sorry windows 7 64 bit ultimate

oh and ram is 1600 mhz default but after this sleep problem I had to put it to 1333. ugh I'm going with intel next built.