PSU Mount Bent from Shipping NZXT Source 210

blue_smoke

Honorable
Nov 10, 2013
720
0
11,160
So guys,

I recently received my NZXT Source 210 from Amazon. It had been shipped through their free shipping and their was no noticeable damage on the box they sent it in. There was no damage to the case box either. It arrived with the PSU mount slightly bent up, not down if that helps at all. It looks warped and I'm wondering what I should do to help unwarp it. WIll it straighten out when I try to install a PSU in? It's not worth a return, the shipping alone would cost 20 bucks.
 
Solution
You could see if they'll cover return shipping. If it's not worth returning, then you could try to straighten it yourself. It may straighten with the psu mounted depending how bent it is. You could also try contacting the manufacturer (nzxt). I got a phanteks case from newegg that arrived with a minor defect and went directly through phanteks for a replacement part. They covered it under warranty. Since neither box appeared damaged it may not have been damaged during shipping and rather bent/damaged at the factory prior to boxing there. If that's the case, which it sounds like, nzxt should cover it.
You could see if they'll cover return shipping. If it's not worth returning, then you could try to straighten it yourself. It may straighten with the psu mounted depending how bent it is. You could also try contacting the manufacturer (nzxt). I got a phanteks case from newegg that arrived with a minor defect and went directly through phanteks for a replacement part. They covered it under warranty. Since neither box appeared damaged it may not have been damaged during shipping and rather bent/damaged at the factory prior to boxing there. If that's the case, which it sounds like, nzxt should cover it.
 
Solution