Everything was going smoothly with this build. As soon as I plugged in the AMD Sapphire R9 290x Card the BIOS won't even boot. Just get a black screen. I go into the mobo settings, tell it to use the integrated card and then it will get to Windows startup and then still turns black. Obviously if I take the card out everything runs fine.
Interestingly, when I set it to Integrated it looks like it is booting, but its black. When I hit the power switch it does not immediately shut down as if Windows in loading.
Then I booted into safe mode using the integrated card while the 290x was plugged in, Windows sees it in Device Manager but as a 200 driver and says it still updated. I have tried so many configs I am dying here. Can;t figure this one out. Thanks for the help!
Interestingly, when I set it to Integrated it looks like it is booting, but its black. When I hit the power switch it does not immediately shut down as if Windows in loading.
Then I booted into safe mode using the integrated card while the 290x was plugged in, Windows sees it in Device Manager but as a 200 driver and says it still updated. I have tried so many configs I am dying here. Can;t figure this one out. Thanks for the help!