- Nov 8, 2013
- 71
- 0
- 10,630
hi i have installed two 4gb g skill sniper ram
F3-12800CL9-4GBSR in slot 2 and slot 4
My timming are set as 11 11 11 28 39
should i simply go to DRAM timming in bios and change as 9 9 9 24 33 and command rate to 2T , and set voltage to auto
or everything on auto except 9 9 9.
As i did this in the past My HTlink speed was set to 2000MHz from 2400Mhz , why does that happened
is this is risk free as i builded this pc very hard and on budget by saving money for 2 years
My specs are
fx 6300 not overclock
Asus m5a97 evo r2.0
8gb sniper ( two 4gb sticks)
Thank you.
F3-12800CL9-4GBSR in slot 2 and slot 4
My timming are set as 11 11 11 28 39
should i simply go to DRAM timming in bios and change as 9 9 9 24 33 and command rate to 2T , and set voltage to auto
or everything on auto except 9 9 9.
As i did this in the past My HTlink speed was set to 2000MHz from 2400Mhz , why does that happened
is this is risk free as i builded this pc very hard and on budget by saving money for 2 years
My specs are
fx 6300 not overclock
Asus m5a97 evo r2.0
8gb sniper ( two 4gb sticks)
Thank you.
Facebook
Twitter
Instagram