PC with no display and then it turns itself off after 10 seconds

Toggle sidebar Toggle sidebar
J

joshlane

Reputable
Nov 30, 2014
15
0
4,520
I have just finished rebuilding my PC after cleaning it, it was working fine prior to this and no components have been changed! I don't have a boot speaker so do not know if I'm getting any beep codes.

If I remove both sticks of RAM then the PC doesn't turn off but still doesn't display

Specs:
Motherboard: gigabyte 990fx ud5
CPU: fx 8350
CPU cooler: corsair h100i
Ram: 2x4gb corsair dominator platinum 1866mhz
GPU: gigabyte 970 g1 gaming
PSU: corsair rm1000
HDD: 2x WD greens 1tb
SSD: crucial mx1000 256gb
 
Sort by date Sort by votes
HiggsPrime

HiggsPrime

Honorable
Apr 19, 2014
131
0
10,710
Hello Joshlane,

Removing the sticks will not do anything and it is dangerous of remove sticks while the PC is running.

Troubleshoot the following:

1. Make sure the GPU fans are running, if not then connect the GPU to PSU correctly

2. make sure your GPU is connected to rightful position

3. connect the video cord from Mobo to Monitor and see of your GPU is recognised by goin to device manager. Under "device Manage"r go to "Display Adapters" and see if there is any problem. Reinstall the drivers or revert back to originals settings and then update it.

4. Consult your Mobo maunual as to where the RAM should be placed. Usually its DDR2 and DDR4 positions.

5. Makesure the connection to your Mobo is correct, there should be 2 connections, one near/beside CPU and the other is the biggest one.

Hope these troubleshooting guidelines helps :)
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom