Is there a way to transfer RAW eithernet data use wireless?

sam000000

Reputable
Apr 29, 2015
4
0
4,510
Hi everyone.
I have a modem connect to internet and few wired clients in room A, but I want my router in room B, without physical connection between room A and B, is that possible?
I also want ALL main features like PPPOE dial, routing, DHCP etc done by the main router, so:
internet --- modem --- ?wirelessRJ45a? --- ?wirelessRJ45b? --- router --- ?wirelessRJ45c? --- ?wirelessRJ45d? --- wired clients
I think it may possible to do wirelessRJ45a/c by use a pure AP without DHCP or NAT? What about b/d? And does a router support to dial up wirelessly?
Thank you!
 
Solution
It is extremely unclear what you want to do. The function you describe is a wireless bridge but exactly which variant you need is hard to say.

I would look at engenius or ubiquiti site. Mostly I use these for outdoor use but they sell indoor product. Mostly look at the sites to see if you can identify which type of devices you are really going to need. I know many of them can run in multiple modes so they can server different purposes.
It is extremely unclear what you want to do. The function you describe is a wireless bridge but exactly which variant you need is hard to say.

I would look at engenius or ubiquiti site. Mostly I use these for outdoor use but they sell indoor product. Mostly look at the sites to see if you can identify which type of devices you are really going to need. I know many of them can run in multiple modes so they can server different purposes.
 
Solution

sam000000

Reputable
Apr 29, 2015
4
0
4,510


Thank you. I read a lot and also found wireless bridge is what I need.
Just didn't tried dial PPPOE wirelessly, but I'll get a OPENWRT and it may not be a problem...