Repeated intermittent BSoD's

kageyfna

Reputable
Apr 16, 2015
1
0
4,510
Hopefully this is the right forums to post in, I been having many issues with my PC as of late.

It started out with being unable to get into Windows at all, I would just get a black screen error stating "An unexpected I/O error has occurred".

I was thinking this was a possible hard drive issue, and since I already had a new SSD and Video card on order decided to just go ahead and do a fresh Win7 Install.

Soo I get that done, everything seems to be going smooth for a day or two.
Now I'm randomly blue screening.
The pattern goes like this:
1. Computer boots ok
2. Start browsing the web or playing a game for about 20 mins or so then crash
3. BSoD flashes for a quick second then computer reboots on it's own.
4. Windows gives option to either Launch start up repair or start normally.
5. Either option gives this BSoD and stays until I reboot.
20j48i8.jpg

6. After the 2nd reboot it will either
a. Bring me back to the start up repair screen, I select start normally and windows boots.
b. The computer fans and LED's will turn on for a few seconds, monitor stays off, then everything turns back off, then back on, then off etc. If this happens the only way I was able to break the cycle was to reset the BIOS by removing the CMOS battery.

I have also tested my system RAM thinking that may have been a problem but Memtest comes back clean.

Any help would be appreciated :)

Hardware:
Power Supply: 700w http://www.newegg.com/Product/Product.aspx?Item=N82E16817341018
Mobo: http://www.newegg.com/Product/Product.aspx?Item=N82E16813131773
Video Card: GTX 960 4gb http://www.newegg.com/Product/Product.aspx?Item=N82E16814487128
CPU: i5-2500K Sandy Bridge Quad-Core 3.3GHz http://www.newegg.com/Product/Product.aspx?Item=N82E16819115072
Ram: 16gb http://www.newegg.com/Product/Product.aspx?Item=N82E16820231473
Hard drive: 480gb SSD http://www.newegg.com/Product/Product.aspx?Item=N82E16820167227

Update:
I removed 2 sticks of RAM last night and haven't crashed since. Hopefully I've narrowed down the problem.
 
the first parameter to the bugcheck indicates a error code that means a bad memory address was used. This can be a bug in a driver, or a corruption of the drivers data or a actual problem with your physical memory.


I would update the BIOS, or reset it to defaults. sometimes the BIOS will put in updated secondary memory timings it will also force the BIOS to rescan and assign hardware interrupts and DMA channels and rebuild the database it sends to windows.
(it might allow you to use your extra ram sticks, Some boards require extra delays when all the RAM slots are populated)
 

TRENDING THREADS