HP Pavilion DV6 hangs on HP logo and I can't do anything.

Toggle sidebar Toggle sidebar
SGT500

SGT500

Honorable
Dec 28, 2013
5
0
10,510
hey there. I have the same problem. When I shut down yesterday my HP Pavilion DV6 with WIN7 OS , I couldn't turn it on today. after welcome logo, there was blue screen with error code stop:0x0000007B, then it goes on restart and the same again and again. I've tryed startup repair but it doesn't helped too. at once I canged bios options to factory defaults and it warked - my laptop turned on, but I knew that I had to reinstall my windows7 OS and changed in bios options first boot order to DVD ROM. everything was going ok, but after first restart (wich works automatically) it didn't started up, it hangs on HP logo and I can't do anything. I moved HDD in my another PC and CONTINUED windows installation there. it's working there, but not on HP Pavilion DV6. the laptop keeps hanging on the same logo.

can anyone halpe me?
my oportunity and any ideas are already useless :(

thanks to all.
 
Solution
SuperSoph_WD

Seems like a very unfortunate situation. :(
Another thing you could try is resetting BIOS, but since it's a laptop I'd recommend to refer to the manual about the procedure. If it involves opening the computer make sure it's not still in warranty, otherwise tempering with the...
Sort by date Sort by votes
SuperSoph_WD

SuperSoph_WD

Glorious
Jul 30, 2014
6,758
3
45,960
Hey there, SGT500!

Seems like a pretty unfortunate and annoying situation. Good job with the troubleshooting steps you've taken so far. I guess one thing you can try to fix this is updating (flashing) BIOS. You can refer to this tutorial for a step-by-step: http://www.7tutorials.com/how-update-bios-your-computers-motherboard-5-steps
However, I strongly recommend being very careful with it because some fatal mistakes can lead to corruption of the motherboard's firmware.

I'm not sure if you've tried running the fixmbr \Device\HardDisk0 command from the Command prompt using your Windows System Recovery/Installation media.

Keep me posted. Hope this helps!
SuperSoph_WD
 
Upvote 1 Downvote
SGT500

SGT500

Honorable
Dec 28, 2013
5
0
10,510


thank you for attention. I thought so, but I hadn't done that yet. I read all the tutorial wich you have adviced, but... when I press the turn on button, PC is hanging on HP logo, I can't access in BIOS, or in CLI and etc. It has no reaction, only the ctrl + alt + del combination works and it goes on restart :D how can I get BIOS version information in such situation?

PS. I haven't tried such comand fixmbr \Device\HardDisk0.
 
Upvote 0 Downvote
SuperSoph_WD

SuperSoph_WD

Glorious
Jul 30, 2014
6,758
3
45,960

Seems like a very unfortunate situation. :(
Another thing you could try is resetting BIOS, but since it's a laptop I'd recommend to refer to the manual about the procedure. If it involves opening the computer make sure it's not still in warranty, otherwise tempering with the components inside would void it.
As for the fixmbr command, I believe this tutorial might shed some light on the matter: http://www.7tutorials.com/command-prompt-fix-issues-your-boot-records

Keep me updated with the troubleshooting! :)
SuperSoph_WD
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom