Please help pc wont boot with ram

Robert102

Reputable
May 7, 2015
5
0
4,510
Good day.

i have a

H55MXV

Intel® Core™ i7, Core™ i5, Core™ i3processors, Socket LGA1156
Supports Intel® 45nm Hi-K CPU
Dual channel DDR3 1333/1066/800 x 2 DIMMs, Max. 8GB
1* PCIe2.0 x16, 1* PCIe x1, 2* PCI
6* SATA II
5.1 channel HDA
Gigabit LAN
12 USB 2.0 ports

mother board.

i am running 2 gig ddr3 ram and i have a new 4 gig ddr3 ram but when i put the 4 gig with my 2 gig (biggest in the first slot) my pc wont start it starts up and shows that its reading the usb ports hdd ram and so on but it reads about 3048mg ram and reboots only way it stops is when i turn it off or it will just reboot none stop if i have the 4 gig alone it still does it. if i have the 2 gig it works fine -.- if i take the 4 gig and use it on another pc it works no problem.

im not to clued up on pc`s so please can someone help me i want to run the 2 and 4 gig same time can i? and how can i get my pc to run this 4 gig ddr3 stick without it rebooting at splash screen i cant even get into the bios (only with my 2gig ram i can) but even then i dont know what im doing in the bios please can someone help me cause when i play games and do stuff on my pc 2 gig just isn`t enough i can feel it like jerking and so on alt+ctrl+del task manager shows me that im using 1.73gig and it starts going abit crazy please help me someone.
 

Robert102

Reputable
May 7, 2015
5
0
4,510
i found this

Zeppelin PC Memory (RAM) - DIMM DDR3 1333Mhz (PC3-10600) CL9 - 8GB compatibility review

so shouldnt my apacer (pc3-10600) cl9 - 4gb work but alone i can now get into bios with it and change everything but once i save and it shows the windows sign it reboots no matter what i change i even tried to change the dram 0.2+V and still nothing just reboots