R9 270x Burn-in test

NytfoX07

Distinguished
Mar 17, 2015
42
0
18,540
Im having issues with my MSI R9 270x hawk so i sent it for RMA service. they tested there it seemed to come kinda normal.
They tested Furmark Burn in test on 1600*900 with 4x MSAA.
they sent me ss of it getting around 23 fps.
So anyone else here can tell me is it normal? If anyone can test on same settings please do show the results of FPS.
 

NytfoX07

Distinguished
Mar 17, 2015
42
0
18,540
Actually i was having high temp issues. Temp goes upto 102 so i had to sent it. The issue was , the cars had some program that whenever it crossed the 100 the core clocked drop down and locked to 450mhz to prevent damage to gpu. While the normal clock is 1050mhz so the performance dropped down by 60%. When they tested it there on furmark test the results were 23fps on 1600*900 msaa 4x so i wanted to compare if its normal
 
you need to ask people with similar gpu to do the test. probably the heatsink were not properly attached or there are too much thermal paste applied to the card. it happen to me in the past with my 660. idle temps were fine but the load temp were easily reach 80c. most 660s that get reviewed never get that hot when fully loaded. because i'm not satisfied with it i reapply the thermal paste myself and solved the problem. did you ask them what the temperature are when they run furmark?
 

NytfoX07

Distinguished
Mar 17, 2015
42
0
18,540

I said it already bro it goes upto 102 , its damn hot. I should surely get replacement. As im not into opening GPU in parts so i aint gonna do it by myself