I have the following specs:
Asus p5n-e sli
Q6600 2.4ghz
4 1GB DDR2 OCZ RAM
Ultra 700 Watt ATX Power Supply ULT VX700
When I use 3 of the dimms, the computer boots fine (one beep). When I insert the 4th dimm, the computer doesn't pass POST, it doesn't beep, it just sits there running. What about using all 4 slots of the asus is causing this? Is there not enough power?
When I boot into the Phoenix AwardBIOS (when using 3GB of RAM), under POWER > Hardware Monitor, I see the following:
CPU Q-Fan Control [Disabled]
Chassis Q-Fan Control [Disabled]
Vcore Voltage [1.23V]
3.3V Voltage [3.31V]
5V Voltage [4.97V]
12V Voltage [12.03V]
CPU Temperature 42 C
M/B Temperature 38 C
CPU Fan Speed 2596 RPM
CHA_FAN1 Speed 1448 RPM
CHA_FAN2 Speed 0
CPU Fan Speed Warning [600 RPM]
What could be wrong?
Asus p5n-e sli
Q6600 2.4ghz
4 1GB DDR2 OCZ RAM
Ultra 700 Watt ATX Power Supply ULT VX700
When I use 3 of the dimms, the computer boots fine (one beep). When I insert the 4th dimm, the computer doesn't pass POST, it doesn't beep, it just sits there running. What about using all 4 slots of the asus is causing this? Is there not enough power?
When I boot into the Phoenix AwardBIOS (when using 3GB of RAM), under POWER > Hardware Monitor, I see the following:
CPU Q-Fan Control [Disabled]
Chassis Q-Fan Control [Disabled]
Vcore Voltage [1.23V]
3.3V Voltage [3.31V]
5V Voltage [4.97V]
12V Voltage [12.03V]
CPU Temperature 42 C
M/B Temperature 38 C
CPU Fan Speed 2596 RPM
CHA_FAN1 Speed 1448 RPM
CHA_FAN2 Speed 0
CPU Fan Speed Warning [600 RPM]
What could be wrong?