ASRock Z97M Pro4 Micro ATX LGA1150 Motherboard, question about Post beep

Toggle sidebar Toggle sidebar
S

ShawnMc

Reputable
May 12, 2015
4
0
4,510
I Just put together my first build, all went well, I have video, and set procedures on screen, but for now, what I noticed was I could not hear any beeps, I turned the 4 pin beep speaker around to see if I had reversed. but still no beep.
I am pretty sure I have all the head pins right, except the last to led light pins, they broke them out into 2 single contentions, Their was only 2 spots left in that row, so I guessed and put them there.



Should I be concerned?
How should I proceed?

Thank You
Shawn

Cooler Master N200 MicroATX Mid Tower Case
ASRock Z97M Pro4 Micro ATX LGA1150 Motherboard
EVGA 600B 600W 80+ Bronze Certified ATX Power Supply
 
Sort by date Sort by votes
S

ShawnMc

Reputable
May 12, 2015
4
0
4,510
Update: I think I am hearing two beeps at start up.
Also When I placed my video card in all of a sudden I had no display.
EVGA GeForce GTX 750 Ti 2GB Superclocked Video Card

Update: I am at an impasse here: I am not sure what to do going forward. To set the stage, I just finished hooking up everything in the case, [ Missed the part about running it on the bread board. ] everything went well, till I got to the front pins, figured that out.
Turn on the machine and no video image of any kind. all fans are on. [ 2 beeps ]

So I took out the video card, and tested and I saw a black creen with set up options. [2beeps]

secured the ram a second time, tested; same as above.

I need to find out if I am missing a step, maybe an install cd, is that set up screen something in there I need to run, or tear down a rebuild. lol I feel the world is closing in on me
..
 
Upvote 0 Downvote
S

ShawnMc

Reputable
May 12, 2015
4
0
4,510
I took out the ram again and installed just one, fired it up with out the video card, one Beep! 1 and black screen display was visible. ok then, I switch to the other stick of ram, again 1 beep and black screen display.

ok well , hurm, maybe by replace the ram a couple time losened it up some, so I put both sticks back in, no card, turned it on, One Beep! Great making progress.
So I put back in the video card, turn it on, and One Beep! but no display =-( I repeate... No display?
Now what.
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom