Win7 won't start, the bios is inaccessible and the win7 dvd won't... I'm near to burn my house T_T

blackcom90

Reputable
May 18, 2015
3
0
4,520
Hi all! before starting i'll say that i saw heaps of post here regarding my problem, but no one worked... sooo... if you are up for the challenge come here end help me ;)

One morning suddenly my computer decided that working how it was supposed to do was too much for him.

Basically the computer have a mb asus maximus iv extreme-z and a 3600k cpu.
When i tried to startup the computer it asked me if i wanted to try the repair or start windows normally, but when i press down for the second option it ignore me and do the repair that obviously doesn't work.
I tried to load from the same utility a recovery point but it won't succed, so i tried most of the command prop fix that i found here (bootrec , reg backup and other) but they didn't work.
I tried to use a dvd of win 7 (iso downloaded from the microsoft website) to do a repair, it get stuck on the boot option after you press a key to enter the dvd boot procedure.
So i thought the problem was the bios and pressed del to enter, but the system froze.
At this point i tried to use a usb with the bios (processed by crashfree 2 bios), but after the missing bootmgr error now it won't even boot any more.
Pressed f8, but the system froze again.
I tried the dvd form the asus and the pc open the asus make disk utility and when i have to press 1-3 to choose the sata 32 bit, the sata 64 or the dos prompt it won't take nothing outside the number 2 and after that say to me break-control pressed and if i want to stop C:/ BAT something (y/n/all). Obviously i can't choose one of them.

Guys can you save me from this pit of despair?
 
Solution
Hi! after a lot of try i managed to fix the problem. Basically the bios, boot and dirver were dead. First of all i fixed the bios switching from a keyboard usb to an old PS/2 and used the command promp to launch manually the EZ flash to replace the broken bios (here i have to tank a frind of mine that is a great programmer); after the bios was fixed we took out the hdd and using an adapter and onther pc, using gparted, we changed the boot sector of the hdd and with a bootable usb (ubuntu) we copied on it the mbr. After this i was able to boot the win 7 repair disk, repiar the mbr and copy it back in the original sector.
After this i was able to enter the os.
At this point i partially fixed the usb reinstalling their drivers.
Now the...

blackcom90

Reputable
May 18, 2015
3
0
4,520
For the ram i did the memory check and no error were found. For the hdd i used the utility of the recovery img installer to see if i could access the data inside it and i was able to roam freely inside the hdd.
For the motherbord i have a debug screen that should show me if an error occur and nothing was out of the ordinary...
There are other test that i can perform?
 


If you can't even enter the BIOS, there is definitely something wrong. Try staring up the system with nothing attached to the SATA ports. If that also does not help, contact the motherboard vendor for support or just replace the motherboard. There is not much that can cause the BIOS not to work, CPU maybe outside of the RAM and motherboard.
 

blackcom90

Reputable
May 18, 2015
3
0
4,520
Hi! after a lot of try i managed to fix the problem. Basically the bios, boot and dirver were dead. First of all i fixed the bios switching from a keyboard usb to an old PS/2 and used the command promp to launch manually the EZ flash to replace the broken bios (here i have to tank a frind of mine that is a great programmer); after the bios was fixed we took out the hdd and using an adapter and onther pc, using gparted, we changed the boot sector of the hdd and with a bootable usb (ubuntu) we copied on it the mbr. After this i was able to boot the win 7 repair disk, repiar the mbr and copy it back in the original sector.
After this i was able to enter the os.
At this point i partially fixed the usb reinstalling their drivers.
Now the pc work, but sometime the usb 3.0 stop workin randomly and not all toghter so i have to switch the devices to the one that works.XD
 
Solution