- Apr 1, 2008
- 503
- 0
- 19,060
I am trying to find a PC case with specific features and so far, have not been able to, so asking here if anyone knows of one...
Features:
1. All black with a full mesh front(no doors or extra fancy plastic)
2. USB 3.0 & Audio on the top or front top.
3. Two 140mm fans in the front the screw in(no clip in as you can't use rounded case fans)
4. At least three 5.25" drive bays.
5. A single 120/140mm fan top opening(don't want/need two)
6. Black inside with a bottom mounted PSU.
7. A middle drive cage that is removable(allows upper-front 140mm fan blow straight into the system)
8. Good thick construction.
9. Side window with NO fan mounts.
10. $120 or below.
There are plenty of case with some of these, but can't find any with all of them. The case I am currently using, a Fractical Design Core3000-Black comes close, but fails on a few. It was 2x140mm top fans. It has 1x140mm & 1x120mm front fans that clip in, so can't use rounded case fans. It only has two 5.25" bays. And lastly, its construction is thin as it warped during shipment and I has to manually bend it back, and it's still not right.
Reason I want 2x140mm in the front and a single top 120/140mm fan is that's my preferred air flow to maintain a positive pressure case. I wont use the rear fan my Hyper-212 Evo is in push/pull with an SP120 as the push and an AF120 as the pull. Being only a few inches from the rear exhaust, that AF120 just sends the air out there, no need for an exhaust fan IMO.
Any recommendations?
Features:
1. All black with a full mesh front(no doors or extra fancy plastic)
2. USB 3.0 & Audio on the top or front top.
3. Two 140mm fans in the front the screw in(no clip in as you can't use rounded case fans)
4. At least three 5.25" drive bays.
5. A single 120/140mm fan top opening(don't want/need two)
6. Black inside with a bottom mounted PSU.
7. A middle drive cage that is removable(allows upper-front 140mm fan blow straight into the system)
8. Good thick construction.
9. Side window with NO fan mounts.
10. $120 or below.
There are plenty of case with some of these, but can't find any with all of them. The case I am currently using, a Fractical Design Core3000-Black comes close, but fails on a few. It was 2x140mm top fans. It has 1x140mm & 1x120mm front fans that clip in, so can't use rounded case fans. It only has two 5.25" bays. And lastly, its construction is thin as it warped during shipment and I has to manually bend it back, and it's still not right.
Reason I want 2x140mm in the front and a single top 120/140mm fan is that's my preferred air flow to maintain a positive pressure case. I wont use the rear fan my Hyper-212 Evo is in push/pull with an SP120 as the push and an AF120 as the pull. Being only a few inches from the rear exhaust, that AF120 just sends the air out there, no need for an exhaust fan IMO.
Any recommendations?
Facebook
Twitter
Instagram