Custom build PC won't boot up. Please need help!

kuboss13

Reputable
Sep 13, 2014
21
0
4,510
I'm pretty sure I connected everything. The only thing from this list I don't have is RAM and disk drive, but I saw a video of guy booting the Pc up without RAM.

So my question is, do I need to wait for the RAM to arrive and then see if it boots up or did I not connected some cables? Or maybe some components are broken? I tried to boot up the PC once but it didn't worked, then I found out that a cable was not connected. So when I connected it I tried again and nothing happened. Do you think that the lack of RAM is the problem?
 

kuboss13

Reputable
Sep 13, 2014
21
0
4,510


To see if it works :d

Thanks for advice, I will wait and then try again, not earlier.
 

kuboss13

Reputable
Sep 13, 2014
21
0
4,510


1. Sorry to all people who repiled before, I meant to reply to him, not to choose as best answer :|.

2. I don't know if we are talking about the same thing, because it does not even turn on for 0.1 second.
 

kuboss13

Reputable
Sep 13, 2014
21
0
4,510
So, I think the problem was that CPU was not connected properly. What I mean is I did not blocked the blockade thing all the way down because I was afraid that I could break something; the heat sink was fitting so I was like "ok" and thought that would do. Despite that, I will just wait for the RAM to come and will try turning it on again.
 
If you wish to, we can unselect the best answer for you.

 

kuboss13

Reputable
Sep 13, 2014
21
0
4,510


Does not really matter now mate, because I found out the solution by myself :D