Hi i'm new to overclocking so just want a simple guide to overclocking my CPU.
PC spec:
CPU : AMD FX-8350 black edition
GPU : Asus strix GTX970 4GB DDR5
Motherboard : ASUS Crosshair V Formula-Z AM3+
Cooler : Noctua NH-D15
Ram : Kingston HyperX FURY 16GB1866MHz CL10
Fans : 7 Nzxt Led fan 140mm + 2 Noctua fan 140mm 2000rpm
SSD : Samsung ssd 850 Evo 1TB
HDD : Seagate 1TB 7200rpm
Nxzt fan controller
PSU : Evga supernova 1000w 80 plus gold certificate
Monitor : ASUS PB278Q 27-Inch WQHD LED-lit Professional
System: Windows 8.1 64bit + Arch Linux
Case: Nzxt switch 810 full tower case
these are the settings i did in BIOS:
i tried overclock CPU to 4.7
volt: 1.44v
also i disable these options ( cool 'n' quite + cle + svm )
CPU ratio: 20.0
CPU bus frequency: 235
AMD turbo: disable
CPU/nb frequency: 2200
ht link speed: 2600
CPU spread: disable
xtream tweaker: enable
DIGI vrm/power control ( CPU load line calibration: ultra high + CPU/NB load line calibration: high + CPU voltage over current protection: 130% + CPU/NB voltage over current protection: 130%)
CPU manual voltage 1.44v
CPU/NB manual voltage: 1.200000
Temp at normal: 29C
Temp under load using prime95: 64-65C after testing for an hour and i see a notification upon date and time in windows said Warning CPU temp 65.0C, also i have a fan controller for intake fans 5 of them i push them to the top all the time. so is that a safe temperature?
also when i decrease the voltage to 1.4v with 4.7GHz and use prime95 the computer hangs and sometimes i see blue screen, with 1.44 it's OK.
Another Q is there a difference between my cooler and corsair h100i?
Any advice would be most welcome!
PC spec:
CPU : AMD FX-8350 black edition
GPU : Asus strix GTX970 4GB DDR5
Motherboard : ASUS Crosshair V Formula-Z AM3+
Cooler : Noctua NH-D15
Ram : Kingston HyperX FURY 16GB1866MHz CL10
Fans : 7 Nzxt Led fan 140mm + 2 Noctua fan 140mm 2000rpm
SSD : Samsung ssd 850 Evo 1TB
HDD : Seagate 1TB 7200rpm
Nxzt fan controller
PSU : Evga supernova 1000w 80 plus gold certificate
Monitor : ASUS PB278Q 27-Inch WQHD LED-lit Professional
System: Windows 8.1 64bit + Arch Linux
Case: Nzxt switch 810 full tower case
these are the settings i did in BIOS:
i tried overclock CPU to 4.7
volt: 1.44v
also i disable these options ( cool 'n' quite + cle + svm )
CPU ratio: 20.0
CPU bus frequency: 235
AMD turbo: disable
CPU/nb frequency: 2200
ht link speed: 2600
CPU spread: disable
xtream tweaker: enable
DIGI vrm/power control ( CPU load line calibration: ultra high + CPU/NB load line calibration: high + CPU voltage over current protection: 130% + CPU/NB voltage over current protection: 130%)
CPU manual voltage 1.44v
CPU/NB manual voltage: 1.200000
Temp at normal: 29C
Temp under load using prime95: 64-65C after testing for an hour and i see a notification upon date and time in windows said Warning CPU temp 65.0C, also i have a fan controller for intake fans 5 of them i push them to the top all the time. so is that a safe temperature?
also when i decrease the voltage to 1.4v with 4.7GHz and use prime95 the computer hangs and sometimes i see blue screen, with 1.44 it's OK.
Another Q is there a difference between my cooler and corsair h100i?
Any advice would be most welcome!
Facebook
Twitter
Instagram