Hi every body,
I have already read many post here about setting the memory voltage rate manualy to match the FSB: DRAM ratio with FSB 1333 CPU. So I change my memory Voltage rate in BIOS from Auto(it run at 800 in auto mode) to 2.0V to get the memory running at 667, and get a 1:1 in FSB: DRAM rate.
After I run again a memory test with MemTest, and I got the same error that is telling me that there is Memory error detected, computer cannot accurately dtore data in RAM, and see online fAQ, question #2 for advice on whate to do next. back to square one!
now I don't know what to do? would it better work if I buy a DDR2-1066?
I have already read many post here about setting the memory voltage rate manualy to match the FSB: DRAM ratio with FSB 1333 CPU. So I change my memory Voltage rate in BIOS from Auto(it run at 800 in auto mode) to 2.0V to get the memory running at 667, and get a 1:1 in FSB: DRAM rate.
After I run again a memory test with MemTest, and I got the same error that is telling me that there is Memory error detected, computer cannot accurately dtore data in RAM, and see online fAQ, question #2 for advice on whate to do next. back to square one!
now I don't know what to do? would it better work if I buy a DDR2-1066?