Hi, just completed a build and have 32GB of
G.SKILL Ripjaws X Series 32GB (4 x 8GB) 240-Pin DDR3 SDRAM DDR3 2400 (PC3 19200) Desktop Memory Model F3-2400C11Q-32GXM
With the GIGABYTE GA-Z97X-Gaming 5 LGA 1150 Mobo and Intel 4790K Devils Canyon CPU
When going into the bios, the DRAM voltage says 1.5, but this memory is rated at 1.65. Should this be changed? It was set to Auto and actually couldn't change it.
Second question
The memory is rated at 2400, but I thought I saw in the bios it was set to 1333. I presume this needs to be changed?
Any advice on helping me configure this memory will be awesome!! Thank you!
G.SKILL Ripjaws X Series 32GB (4 x 8GB) 240-Pin DDR3 SDRAM DDR3 2400 (PC3 19200) Desktop Memory Model F3-2400C11Q-32GXM
With the GIGABYTE GA-Z97X-Gaming 5 LGA 1150 Mobo and Intel 4790K Devils Canyon CPU
When going into the bios, the DRAM voltage says 1.5, but this memory is rated at 1.65. Should this be changed? It was set to Auto and actually couldn't change it.
Second question
The memory is rated at 2400, but I thought I saw in the bios it was set to 1333. I presume this needs to be changed?
Any advice on helping me configure this memory will be awesome!! Thank you!
Facebook
Twitter
Instagram