S SteakOnSpray Reputable May 24, 2015 1 0 4,510 May 24, 2015 #1 So my motherboard are not labeled with where I should place the pins, and i don't have a manual for my old prebuild pc. I need some help to start the PC so I can go to BIOS and make a new shortcut to start it with.
So my motherboard are not labeled with where I should place the pins, and i don't have a manual for my old prebuild pc. I need some help to start the PC so I can go to BIOS and make a new shortcut to start it with.
Solution Mattios May 24, 2015 You should be able to just use a screwdriver to contact the pairs of pins until one pair turns it on.
You should be able to just use a screwdriver to contact the pairs of pins until one pair turns it on.
Mattios Honorable Jun 24, 2013 2,433 1 12,960 May 24, 2015 Solution #2 You should be able to just use a screwdriver to contact the pairs of pins until one pair turns it on. Upvote 0 Downvote Solution
You should be able to just use a screwdriver to contact the pairs of pins until one pair turns it on.
M mbarnes86 Splendid Sep 16, 2010 3,839 7 26,965 May 24, 2015 #3 Hi Usually there is a label with make & model somewhere on the motherboard which will enable you to find the motherboard manual. Post the details if you want any more help Have you dismanted it without noting which connectors goes where ? there will be connectors for power & hdd leds, reset switch (optional), case open switch (optional) which you will also need to find the correct pins regards Mike Barnes Upvote 0 Downvote
Hi Usually there is a label with make & model somewhere on the motherboard which will enable you to find the motherboard manual. Post the details if you want any more help Have you dismanted it without noting which connectors goes where ? there will be connectors for power & hdd leds, reset switch (optional), case open switch (optional) which you will also need to find the correct pins regards Mike Barnes