Need assistance with computer build

AndreDre

Reputable
Aug 8, 2014
17
0
4,510
So I built this computer And I've had it for year now and still no use getting it to work, the issue is I turn it on and the fans spin the GPU fan stops the screen doesn't post and Doesnt send a signal...

I have already tried to remove GPU and use on board, I have cleared CMOS,
I have made sure everything is in

Nothing has seemed to work... Bout to just take it to repair place.. There is no beeps... I did add the small metal things on case too

The build is

Case: Rosewill FRM-02
Board: Asus m5a78l-m lx
CPU: AMD FX 6300 Black Edition
GPU: MSI Radeon r7 240
PSU: ANTEC 450 WATT
Ram: 4GB

I don't have a Disc Drive to be honest I wanted add a OS via USB
 
Solution
per your pm...there a small boot chip that has hardware info flashed into it. it used to start the motherboard. if you look on asus web page for your mb there a cpu guild. under the guild for the 6300 shows you need rev 1501 to boot that mb. if you look at the mb serial number the last 4 numbers are the bios rev of the mb. if it lower then 1501 you need an older chip to boot and update.
per your pm...there a small boot chip that has hardware info flashed into it. it used to start the motherboard. if you look on asus web page for your mb there a cpu guild. under the guild for the 6300 shows you need rev 1501 to boot that mb. if you look at the mb serial number the last 4 numbers are the bios rev of the mb. if it lower then 1501 you need an older chip to boot and update.
 
Solution