So I'm looking to get an Enthoo Luxe case and another EVGA SC 2.0 GTX 980 for SLI. I also am considering getting a NZXT Kraken G10 and Corsair H55 (120mm) for both the 980's. I'm using an H100i (240mm) on my CPU.
I already have the two H55's sitting around doing nothing so I'd only have to buy G10's. And I'm set on the Luxe so no need to recommend another case if this setup won't work.
So my questions are:
1. Could I fit the H100i on top as exhaust, one H55 on the back as exhaust, and one H55 on the bottom as instake? Then whatever case fans I have I'd be pulling in from the front and bottom and exhausting out the back and top.
2. What is the optimal combination of case fans and the coolers in the Luxe?
3. Whats the best setup for intake outake?
4. If it fits, should all the radiators have push/pull on them? If it doesn't fit or the answer is no then which should be push and which should be pull etc.?
Edit: Just saw the Hydro Series HG10 N780 and may do that instead of the G10 if it is compatible and cools the VRM and stuff too but same questions apply.
Thanks!
I already have the two H55's sitting around doing nothing so I'd only have to buy G10's. And I'm set on the Luxe so no need to recommend another case if this setup won't work.
So my questions are:
1. Could I fit the H100i on top as exhaust, one H55 on the back as exhaust, and one H55 on the bottom as instake? Then whatever case fans I have I'd be pulling in from the front and bottom and exhausting out the back and top.
2. What is the optimal combination of case fans and the coolers in the Luxe?
3. Whats the best setup for intake outake?
4. If it fits, should all the radiators have push/pull on them? If it doesn't fit or the answer is no then which should be push and which should be pull etc.?
Edit: Just saw the Hydro Series HG10 N780 and may do that instead of the G10 if it is compatible and cools the VRM and stuff too but same questions apply.
Thanks!