New build, won't send any signal to monitor

Toggle sidebar Toggle sidebar
W

Wulfsguard

Reputable
May 24, 2015
3
0
4,510
Build:
Asus A88X-pro motherboard
Corsair RM650 psu
Radeon R7 260X vid card
AMD Athlon X4 760K processor
4gB corsair RAM (x2)

I fully assembled the parts but when I turn it on, the monitor isn't getting a signal. I've tried using HDMI, DVI and VGA cables on both the vid card and the motherboard with the video card completely removed, with no success. I have also tried stripping everything out, leaving just the motherboard and CPU, again with no success.

I have no idea what the problem could be so any suggestions are welcome.

Thanks
 
Sort by date Sort by votes
W

Wulfsguard

Reputable
May 24, 2015
3
0
4,510


Sorry. Yes, I plugged the PSU into the card.
 
Upvote 0 Downvote
Phillip Corcoran

Phillip Corcoran

Titan
Moderator
Sep 7, 2013
25,981
862
120,140
Thanks. Well I'm not familiar with the BIOS on ASUS boards, but on my ASRock board I had to go in to the BIOS settings and change the location of the video adapter from "integrated" (or "on board") to "PCI Express".

Then save & exit the BIOS.

So take a look in the BIOS settings, that may be the solution.
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom