Solved

[Urgent] How do I take the top and front off of the NZXT Phantom 630 Black Windowed case?

Hey guys I just received all my PC parts, and I was going to add more case fans, but I couldn't figure out how to take off the top and front of this case. Please help, I need to build it today.

Thanks

Luke
2 answers Last reply Best Answer
More about urgent top front nzxt phantom 630 black windowed case
  1. Best answer
    From NZXT website:

    "Begin with the front panel by grabbing at the bottom of the case, and pulling up at a 45 degree angle to remove the panel. It is secured by eight plastic push pins, so be sure not to pull at too extreme of an angle or you will risk breaking them off.

    With the front panel off, you may not remove the top panel by grabbing at the front of the top panel and pull front to back at the same angle as the front panel.

    These may require some force to remove due to the fitment at the factory, but you should always try not to force anything to the point that it will bend or break."
  2. If the plastic pushpins refuse to release using moderate force, you can try squeezing them with your fingers or pliers to make the releasing easier.
Ask a new question

Read More

NZXT Gaming Cases PC gaming