So the radiator would not screw into the case right, so I ordered a new Corsair H80i. Running just 4 cores on Prime95 Small FFS, my CPU gets to about 93C. I checked to make sure the block was sitting right, and I even cleaned the CPU and cooling block and reapplied paste using the line method, making sure to not use too much. It naturally spreads to the edges, so I did not use too little. Also in HW Monitor, it says my VCORE voltage is 1.776 volts. Isn't it supposed to be under 1.25? This just seems liek way too much. The voltage is set to auto, so what should I manually set it to? Also, when stopping Prime95, the temp drops immediately back down to 35C, so I think the heatsink is working correctly.