Newbie [HELP BIOS!!] Questions about CPU 4670k (first time)

andrew89898

Distinguished
Jun 23, 2012
47
0
18,530
Hi, I have had my i5 4670K, Z87-HD3 PC since june 2013. At first I didn't overclock it, but I thought I'd have a go a few months ago. It used to turbo normally and idle at 800Mhz 0.8V then turbo to 3.8ghz at I think 1.1 something volts. I overclocked the turbo multiplier to 40 for each core, 1-core active, 2, 3, 4 etc. And I think I left the voltage on auto and I believe it then stays at 3990Mhz from then on and it doesn't downclock. For some reason my base clock is 99.75 Mhz. Now today I decided I would see if I can get any more Mhz, so I set the multiplier to 42 and voltage to 1.2V manual. It boots into windows and crashes within minutes with WHEA_UNCORRECTABLE_ERROR. I then tried to put it back to 40, Vcore still 1.2V and base clock manual to 100Mhz, but the BIOS froze when I saved. Now I have just loaded into the BIOS, the base clock is back to auto 99.75 so I left it, changed the ratio to 40, which I have been using for months.

The vcore is still 1.2v, so even when it's idle its at 3990Mhz, 1.2V. If I sometimes leave my PC on between 6-8 hours per day, is this killing my CPU? Should I try and get it to downvolt/downclock when idle?

Temps are ~35C idle, 60s in load at the moment. I would ideally like 4.2ghz or 4.4ghz, I was thinking about trying to raise the VCore to around 1.25-30 to achieve this.

What are your thoughts? If you need any more info, ask.

Thanks!
 
Solution
I'm guessing you didn't read a Overclocking Guide. So, first things first, don't mess with the base clock. When you do that, you actually overclock other components on the board as well.

Overclocking works like this:
Increase multiplier until you find a crashing frequency. Then bump the Vcore a little (0.05+ or 0.10). Stress test while monitoring temps. Once you have successfully stressed the CPU at the crashing frequency (meaning you no longer crash), begin increasing the multiplier again. You don't touch voltage until you get to a troubling frequency.

http://www.overclock.net/t/1411077/haswell-overclocking-guide-with-statistics

Edit: Also, know your temperatures...

barto

Expert
Ambassador
I'm guessing you didn't read a Overclocking Guide. So, first things first, don't mess with the base clock. When you do that, you actually overclock other components on the board as well.

Overclocking works like this:
Increase multiplier until you find a crashing frequency. Then bump the Vcore a little (0.05+ or 0.10). Stress test while monitoring temps. Once you have successfully stressed the CPU at the crashing frequency (meaning you no longer crash), begin increasing the multiplier again. You don't touch voltage until you get to a troubling frequency.

http://www.overclock.net/t/1411077/haswell-overclocking-guide-with-statistics

Edit: Also, know your temperatures.
http://www.tomshardware.com/forum/id-1800828/intel-temperature-guide.html
 
Solution

andrew89898

Distinguished
Jun 23, 2012
47
0
18,530
HELP QUICK!! guys I need some help quick I tried 4.2ghz 1.25v fine then 4.4ghz which crashes windows instantly. I am using the fast boot option and was rebooting into bios from os I had full initial usb support enabled just incase (usb keyboard) now I cannot get back into the bios with the delete key. I have used it before.. It may have switched USB ports.. Is the full initial not working? If it's not gonna work is there another way to let me back into bios?

If there is no way, I guess I will need to reset can someone guide me?

Thanks!