Which one of this RAM is better .....?

JunkFoodz

Reputable
Aug 9, 2014
158
0
4,690
Cpu : Fx-6300
Mobo : Asus M5A97 R2.0

which one is better for this mobo and Cpu...
Corsair Vengeance 4GB PC1600 DDR3
Kingston HyperX Fury 4GB PC1866 DDR3

and does both ram compatible with my mobo and cpu...?

pls tell me if u have any suggestion...ty :3
 

ONKI

Reputable
May 23, 2014
547
0
5,160
both the rams are compatible for your mobo,

the kingston is a little faster than the vengeance.

suggestion vengeance are pretty good, if u have a budget issue then u can stick to vengeance.
 

schaft

Distinguished
Jan 24, 2012
545
0
19,360
Your choice of motherboard support up to 2133 MHz ram, so yes, both are compatible for your motherboard.

But you will need 2 piece of same size ram in order to activate dual channel (almost 2x ram performance).

They both priced around US$30 in newegg.

If newegg are within your area, better get directly 2x4Gb. You will not need to upgrade until your FX-6300 last breath and you will have the benefit of using it from now. This is the cheapest and seem reliable since there a lot of user giving full mark. Brand also recognizeable.

CORSAIR Vengeance LP 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Low Profile Desktop Memory Model CML8GX3M2A1600C9
$48.99
http://www.newegg.com/Product/Product.aspx?Item=N82E16820233186

If you have the money, better buy one that maxed out your motherboard and cpu ability, such as

G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 2133 (PC3 17000) Desktop Memory Model F3-2133C9D-8GXL
$59.99
http://www.newegg.com/Product/Product.aspx?Item=N82E16820231689

Choose between those 2 above. If other said 8Gb is unnecessary, ignore them. More and more game need 8Gb for better performance. If you delay the purchase of ram, the DDR3 will be replaced by next generation which make DDR3 become more expensive (such as DDR2 and DDR1 prices now). Ram has very long lifetime and warranty.

Hope this help

 

Tradesman1

Legenda in Aeternum

_______________________

No they won't run at 1333, the Fury operate off PnP, and automatically set themselves up to the highest data rate they can run at, with this combo likely 1866, maybe only 1600.

And as to the earlier remark, NO, they don't utilize XMP, they work off PnP - two totally different things
 

Tradesman1

Legenda in Aeternum
With a 6300, realistically 1866 will be the tops you can run without OCing the CPU, so 2133 is out if not OCing, it's the CPU (specifically the CPUs MC (memory controller) that determines what data rate you can run at (yes the mobo has to support it, but it's not the primary factor as portrayed above)
 

JunkFoodz

Reputable
Aug 9, 2014
158
0
4,690
So If I Install "Kingston HyperX Fury PC1866 DDR3" It Will Automatically Run At 1866 Without Go Into Bios?
And If I Want To Install Another Same Ram. Will Both Ram Run At 1866?

Cuz From What I Read Both Ram Support Ram 1866MHz Correct Me If Im Wrong U Are The Pro Here
 

Tradesman1

Legenda in Aeternum
The Hyper X Fury will set themselves to run at the highest they can automatically...with a 6300, it will be 1600 or 1866 and yes without going into the BIOS. Mixing DRAM - even of the same exact model has no guarantees of even playing together. It's best to get the full amount of DRAM you want/need in a single package
 

JunkFoodz

Reputable
Aug 9, 2014
158
0
4,690
So If I Want To Buy Ram For My PC Its Better To Buy 1 Stick 8GB HyperX Fury Or 2 Sticks 4GB HyperX Fury In A Single Package

Sry But I Need To Make Sure This All Cuz I Have Paranoid Personality :p
And Sry About My English
 

TRENDING THREADS