I recently bought a Cooler Master JetFlo fan for my PC and I installed it into the top fan spot at the front of my Cooler Master n600 case. The only problem is that it appears that it is stiff when the fan moves, which I think may be caused by rubbing on the case, is there a way to fix this? or something else wrong? I did spin the fan before I put it in to check it worked and it was fine but as soon as I powered my PC and loud scraping noise was heard before shutting it down and unplugging the fan. Thanks in advance, Jaicob.
Fan rubbing/scrating front of my computer case when installed.
- Thread starter Jaico99
- Start date
Solution
BigBadBeef
Admirable
- May 30, 2014
- 2,076
- 0
- 6,460
If it is scraping against something, then the easiest fix would be to place some spacers on the fan screws.
BigBadBeef
Admirable
- May 30, 2014
- 2,076
- 0
- 6,460
My solution would not have required the use of force, but if you employed violence, that's your prerogative!
TRENDING THREADS
-
-
Question Tried moving SSD from old PC to new one, now it won't boot from either
- Started by scyer327
- Replies: 8
-
Question why my pc dont have sound after install new Nvidia GPU Card?
- Started by sudsaviour
- Replies: 3
-
News Windows 11 will reportedly display a watermark if your PC does not support AI requirements- Started by Admin
- Replies: 13
-
Facebook
Twitter
Instagram