Hi everyone I was wondering if you would be able to assist me with this error that I can not solve. As the title states I get an error on boot that says CPU Over Voltage Error and Power Supply Surges Detected. In the BIOS it the CPU Voltages are in the red. Their values are in the image below.
I tried taking out the CMOS battery and putting that back in, along with a few other work arounds but with no luck. Hopefully you can assist me in solving this problem. Thanks ahead of time for your assistance.
Here are the computer specs, it was recently built probably about 6 months ago.
CPU: Intel Core i5-4440 Haswell Quad-Core 3.1GHz (3.3GHz Turbo)
Motherboard: ASUS B85-PLUS LGA 1150 Intel B85 SATA 6Gb/s USB 3.0 ATX Intel Motherboard with UEFI BIOS
GPU: A GeForce GTX 750 1GB 128-Bit GDDR5 PCI Express 3.0 FTW w/ ACX Cooler Video Card
RAM: HyperX Fury Black Series 8GB 240-Pin DDR3
HDD: Western Digital Blue WD10EZEX 1TB 7200 RPM 64MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive Bare Drive
OS: Windows 8.1 64bit
PSU: Rosewill RD600 – Stallion Series 600-Watt Power Supply – ATX 12V V2.3, SLI & CrossFire-Ready
Below should be images attached. If not the imgur links are, Img_1 Img_2
If anymore information is need be sure to let me know and I'll post it as soon as possible. Thanks again and hopefully we can figure this out!
I tried taking out the CMOS battery and putting that back in, along with a few other work arounds but with no luck. Hopefully you can assist me in solving this problem. Thanks ahead of time for your assistance.
Here are the computer specs, it was recently built probably about 6 months ago.
CPU: Intel Core i5-4440 Haswell Quad-Core 3.1GHz (3.3GHz Turbo)
Motherboard: ASUS B85-PLUS LGA 1150 Intel B85 SATA 6Gb/s USB 3.0 ATX Intel Motherboard with UEFI BIOS
GPU: A GeForce GTX 750 1GB 128-Bit GDDR5 PCI Express 3.0 FTW w/ ACX Cooler Video Card
RAM: HyperX Fury Black Series 8GB 240-Pin DDR3
HDD: Western Digital Blue WD10EZEX 1TB 7200 RPM 64MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive Bare Drive
OS: Windows 8.1 64bit
PSU: Rosewill RD600 – Stallion Series 600-Watt Power Supply – ATX 12V V2.3, SLI & CrossFire-Ready
Below should be images attached. If not the imgur links are, Img_1 Img_2
If anymore information is need be sure to let me know and I'll post it as soon as possible. Thanks again and hopefully we can figure this out!
Facebook
Twitter
Instagram