- Dec 11, 2012
- 63
- 0
- 10,640
Hello,
I have a a10-5800k APU. I run it @3.8ghz stable (no turbo) and undervolted (runs cooler). The ram is 1866mhz, igpu running default @ 800mhz stable (with steps 300, 600something and 800 mhz).
I want to max out the fsb, in ortder to max out bandwidth (unless I am mistaken) and not just cpu ghz, and to the point that it wont require any voltage increase. Then drop the multiplier so I have max 3.8ghz.
But fsb affects the whole apu, and I am not expert on this, plus i dont know the relation of fsb, nb (northbridge) and fsb to dram ratio. Note that this an APU, everything is on the same die. Plus I dont know how the above affect ram, igpu and the motherboard.
Some info from cpuz:
bus speed:100, multiplier 38, nb frequency 1500, fsb to dram 3:28, dram 933 (x 2 = 1866)
I have a a10-5800k APU. I run it @3.8ghz stable (no turbo) and undervolted (runs cooler). The ram is 1866mhz, igpu running default @ 800mhz stable (with steps 300, 600something and 800 mhz).
I want to max out the fsb, in ortder to max out bandwidth (unless I am mistaken) and not just cpu ghz, and to the point that it wont require any voltage increase. Then drop the multiplier so I have max 3.8ghz.
But fsb affects the whole apu, and I am not expert on this, plus i dont know the relation of fsb, nb (northbridge) and fsb to dram ratio. Note that this an APU, everything is on the same die. Plus I dont know how the above affect ram, igpu and the motherboard.
Some info from cpuz:
bus speed:100, multiplier 38, nb frequency 1500, fsb to dram 3:28, dram 933 (x 2 = 1866)
Facebook
Twitter
Instagram