- Dec 18, 2014
- 3
- 0
- 4,510
I have a MSI 760GMA-P34(FX) board, and have 2 SSD's on the way.
My question in detail is:
Would it be best to use Firmware RAID-0 via two SATA II ports on the MB, or Hardware RAID-0 (device suggestions?) on a single ASmedia SATA III port.
The SSD's in question are both 64GB, which is why I want to RAID. I'm aware I won't feel much of a difference if I got a single 128GB drive. The price of the two was very good so I got them.
Which is best for access time/speed? As I'm not asking whether I should RAID, I hope the answer seems clear.
Thanks in advance!
My question in detail is:
Would it be best to use Firmware RAID-0 via two SATA II ports on the MB, or Hardware RAID-0 (device suggestions?) on a single ASmedia SATA III port.
The SSD's in question are both 64GB, which is why I want to RAID. I'm aware I won't feel much of a difference if I got a single 128GB drive. The price of the two was very good so I got them.
Which is best for access time/speed? As I'm not asking whether I should RAID, I hope the answer seems clear.
Thanks in advance!
Facebook
Twitter
Instagram