amd fx-6300 black edition with gigabyte 970a-ed3p wont display anything

Toggle sidebar Toggle sidebar
C

colemanryant

Reputable
Jun 29, 2015
2
0
4,510
A co-worker asked me to upgrade his computer and he got a AMD FX 6300 and a GIGABYTE 970A-UD3P. After I installed both I turned it on and all the fans power up and it appears that everything is running but there is a blank display on the monitor. Tried swapping graphics card and reseating the RAM but nothing seems to work.
 
Solution
AscendLegend
Check on another monitor,with both DVI/HDMI cables,if that doesn't work u might wanna remove the cpu cooler and check if the cpu is actually placed correctly(careful though when you are removing the cooler since the cpu might come out as well)
Sort by date Sort by votes
AscendLegend

AscendLegend

Reputable
Mar 25, 2015
55
0
4,660
Check on another monitor,with both DVI/HDMI cables,if that doesn't work u might wanna remove the cpu cooler and check if the cpu is actually placed correctly(careful though when you are removing the cooler since the cpu might come out as well)
 
Upvote 0 Downvote
Solution
jason3871

jason3871

Honorable
Jul 10, 2015
295
0
10,860


The 970 chipset doesn't have onboard graphics. What you're talking about, onboard graphics is something that only the 760 chipset has. OP remove the CMOS battery, keep it off for a while and then replace it and boot up. Now when you boot up, boot up with a single stick of ram.
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom