High temps in prime 95 with hyper 212 evo and light oc

FreshPineApples · Jul 3, 2015

I decided to give my i5 4690k a little overclock to 4.3 ghz and to make it even run p95 for more than a minute or so I had to set the voltage to 1.19 Temps seem well for the first few minutes but right after the second test/phase which takes about 5 minutes temps skyrocket to 80 then 90 so I quickly stop the test. Are these temps to high for a hyper 212 evo and should I reinstall it or is it just not enough?

nikoli707 · Jul 3, 2015

sounds high. what are your ambient temps? how did you install the thermal paste?

clutchc · Jul 3, 2015

If you are running Prime 95 beyond version 26.6, that is the problem. Later versions are not suitable for Haswells.

FreshPineApples · Jul 3, 2015

clutchc :

I am using 26.6 now and the max temp has not passed 84c it usually stays around low to mid 70c I got the voltage down to 1.16 and am doing a small fft and it has been about an hour should I let it run all night and then do a blend tomorrow night and if no problems keep it or go for a lower voltage? I haven't changed my ram speeds at all so a memtest isn't needed right?

sounds high. what are your ambient temps? how did you install the thermal paste?

Ambient temp is about 75f and I used the dot method (I went ahead and replied it)

FreshPineApples · Jul 6, 2015

Got it stable at 1.15v and passed p95 24hours + many runs of ibt.

Search

High temps in prime 95 with hyper 212 evo and light oc

FreshPineApples

Reputable

nikoli707

Splendid

clutchc

Titan

FreshPineApples

Reputable

FreshPineApples

Reputable

TRENDING THREADS

Latest posts

Moderators online

Share this page