- Jul 4, 2015
- 3
- 0
- 4,520
SYX SG-125 Gaming PC - Intel Core i7 2600 3.4 GHz, Genuine Windows® 7 Professional 64 Bit, 1GB NVIDIA GeForce GTX 550 Ti, 8GB DDR3, 1TB 7200rpm HDD, Blu-Ray, USB 3.0
Long story short, I updated wrong BIOS.
I used the usb flash method. I reverted to default settings using the battery method/jumper.
The computer turns on, you can hear a short beep and the monitor goes into initial set up screen.
It gives 2 options F1 to run set up and F2 to continue.
F2 option don't seem to work.
F1 works but it gets stuck on entering setup. The computer has been on for about 5 hours and no change. I unplugged everything but the fans to see if there was a faulty cable and nothing.
What I'm i dong wrong?
Thank you in advance.
Long story short, I updated wrong BIOS.
I used the usb flash method. I reverted to default settings using the battery method/jumper.
The computer turns on, you can hear a short beep and the monitor goes into initial set up screen.
It gives 2 options F1 to run set up and F2 to continue.
F2 option don't seem to work.
F1 works but it gets stuck on entering setup. The computer has been on for about 5 hours and no change. I unplugged everything but the fans to see if there was a faulty cable and nothing.
What I'm i dong wrong?
Thank you in advance.
Facebook
Twitter
Instagram