Hi, im running a I7 - 3770 "non k" on my pc with stock cooler, this are my temps:
Idle:
39 Minimum - 45 Average.
Gaming load (The witcher 3 - 1 hour test):
66 Minimum - 69 Average - 80 Maximum.
Full load (Cinebench test):
94 Average - 98 Maximum.
Rig:
R9 290 Sapphire Vapor X.
8gb Ram 1333.
Asus P8B75-M/CSM motherboard.
EVGA 750W Bronze Power Supply.
Kingston SSD 128gb.
WD HDD 1TB.
Phantom NZXT 240 Case (3 120mm fans, 2 push, 1 pull).
Room temps:
Around 28ºC.
Questions:
1. ¿How f... up am i?
2. If i put one of the 120mm push fans from the front (the second one doesnt push a lot of air because of the design of the case: https://sta3-nzxtcorporation.netdna-ssl.com/assets/images/_originals/phantom-240-case-white-black-front-left.jpg) pulling in the top of the case, it will improve my CPU temps?
3. This rig is mean for gaming - some video editing, Photoshop and 3d Modelling-Rendering. (I know its not THAT AMAZING but its the best that i was able to get with my money outside of the US). Should i go for 16gb of ram for the non-gaming work first? or maybe for a better cooling solution? (I have another build with the same case and i was able to fit a Kraken X41 with some small mods for screws on the top, sadly the 212 Evo was too big... just 1-2mm pushing the glass).
The temps on the rest of the components seem fine. (GPU never goes above 76ºC on full load while gaming).
Thanks for your help and sorry for my bad english.
Idle:
39 Minimum - 45 Average.
Gaming load (The witcher 3 - 1 hour test):
66 Minimum - 69 Average - 80 Maximum.
Full load (Cinebench test):
94 Average - 98 Maximum.
Rig:
R9 290 Sapphire Vapor X.
8gb Ram 1333.
Asus P8B75-M/CSM motherboard.
EVGA 750W Bronze Power Supply.
Kingston SSD 128gb.
WD HDD 1TB.
Phantom NZXT 240 Case (3 120mm fans, 2 push, 1 pull).
Room temps:
Around 28ºC.
Questions:
1. ¿How f... up am i?
2. If i put one of the 120mm push fans from the front (the second one doesnt push a lot of air because of the design of the case: https://sta3-nzxtcorporation.netdna-ssl.com/assets/images/_originals/phantom-240-case-white-black-front-left.jpg) pulling in the top of the case, it will improve my CPU temps?
3. This rig is mean for gaming - some video editing, Photoshop and 3d Modelling-Rendering. (I know its not THAT AMAZING but its the best that i was able to get with my money outside of the US). Should i go for 16gb of ram for the non-gaming work first? or maybe for a better cooling solution? (I have another build with the same case and i was able to fit a Kraken X41 with some small mods for screws on the top, sadly the 212 Evo was too big... just 1-2mm pushing the glass).
The temps on the rest of the components seem fine. (GPU never goes above 76ºC on full load while gaming).
Thanks for your help and sorry for my bad english.