Raid 0 migration

snuggles

Reputable
Dec 13, 2014
7
0
4,510
So i wantend to add 2 more harddrives to my raid 0 set up so i used this intel smart raid? I think i dont rember what i used but it was intel after i added the 2 hdds to my raid setup i restared my pc as it asked me to but upon starting it will ask me to rebot or selcect proper boot device but i am using my the right one it also says when i check on my raid it would say raid status is migration im am completely stuck here and dont know what to do am i going to start fresh with new windows because i have so much data in my raid 0 set up i cant find answers any where sorry for reall poor gramer im on phone and typing quick
 

Samat

Distinguished
Depending in the raid setup, hardware used etc it can take long time to migrate the changes when adding new drives to the raid. If it says raid migrating you should keep the system on and let it finish what it is doing. Check this intel document on raid migration (http://www.intel.com/support/chipsets/imsm/sb/cs-029274.htm).
 

snuggles

Reputable
Dec 13, 2014
7
0
4,510
Na i dosent say its migrating it says status is migration probley same thing tho also i cant boot into windows because of this so i have no percentage of how long its doing it just stuck at reboot and select proper boot device or insert boot device also says its bootable but not i hate this phone so much
 

Samat

Distinguished


So when you check the raid status it says there is a problem migrating or?
 

Samat

Distinguished
Does it sound like the harddrives are doing something? There might be no knowing how much of it is done until it is finished, just keep it running until it says it is done.

Edit. This could take hours depending on the amount of data etc.
 

snuggles

Reputable
Dec 13, 2014
7
0
4,510
Shouldn't i be able to boot into windows at least i mean thers no percentage or anything to get to the raid thing i press ctrl i to get there what am i doing wrong