RAM Not Running Correctly

Solution
WHen you're in your BIOS theres a menu called Cell Menu, in there theres overclocking options, and theres a memory section there. the board doesn't support 1866 on autodetect you need to go in there and set it to 1866.

EDIT ok I was slow on the reply, yes the MC of your CPU may not be able to handle the speed

goobawhoba

Honorable
Apr 6, 2013
12
0
10,510


Hi thanks for responding! I am replacing old RAM and it is one single card. And I where exactly is OC Genie?
 

Tradesman1

Legenda in Aeternum
While the mobo may support 1866, the determining factor is the MC (memory controller) of your CPU, with the X$ 840 it's base for DRAM is 1333 so will prob reuire a healy OC of the CPU as well as additional voltage to DRAM and MC, may also reuire loosening of the timings for the DRAM
 

goobawhoba

Honorable
Apr 6, 2013
12
0
10,510


Ok that makes more sense now. I did try to manually increase the RAM speeds in BIOS and I had 5 choices Auto, 1:2, 1:2.66, 1:3.33, 1:4, I chose 1:4 which put the RAM speed to 1600 Mhz, now I did not see an issue with this but it bricked my computer on restart so I am currently wiping the CMOS and I will leave it alone and not mess with it anymore for fears of damage. But did this happen because my processor could not handle/support this clock speed?
 

Rogue Leader

It's a trap!
Moderator
WHen you're in your BIOS theres a menu called Cell Menu, in there theres overclocking options, and theres a memory section there. the board doesn't support 1866 on autodetect you need to go in there and set it to 1866.

EDIT ok I was slow on the reply, yes the MC of your CPU may not be able to handle the speed
 
Solution

goobawhoba

Honorable
Apr 6, 2013
12
0
10,510


Yeah since I am in the process of building an expensive computer I am going to hold off on buying a new CPU but I am thankful for the help, I never knew a CPU had restrictions on RAM.