T The_dude_abides Reputable Jul 17, 2015 4 0 4,510 Jul 17, 2015 #1 I recently bought the ECS Kam1-I itx mobo to go with an Athlon 5350 and can't seem to find the 12v atx. Do all mobos have them or have a different type of plug for it? I connected everything else and it turns but blank screen ):
I recently bought the ECS Kam1-I itx mobo to go with an Athlon 5350 and can't seem to find the 12v atx. Do all mobos have them or have a different type of plug for it? I connected everything else and it turns but blank screen ):
Solution Someone Somewhere Jul 17, 2015 I can't see one. Maybe the AM1 chips don't use enough power to need it? Try going through here: http://www.tomshardware.com/forum/261145-31-perform-steps-posting-post-boot-video-problems
I can't see one. Maybe the AM1 chips don't use enough power to need it? Try going through here: http://www.tomshardware.com/forum/261145-31-perform-steps-posting-post-boot-video-problems
Someone Somewhere Titan Sep 23, 2012 22,291 8 84,965 Jul 17, 2015 Solution #2 I can't see one. Maybe the AM1 chips don't use enough power to need it? Try going through here: http://www.tomshardware.com/forum/261145-31-perform-steps-posting-post-boot-video-problems Upvote 0 Downvote Solution
I can't see one. Maybe the AM1 chips don't use enough power to need it? Try going through here: http://www.tomshardware.com/forum/261145-31-perform-steps-posting-post-boot-video-problems
BSOD BSTD Honorable Nov 21, 2013 966 0 11,660 Jul 17, 2015 #3 AM1 CPU's dont typically need a separate 4 pin power cable, as they are low wattage. They draw the power from the Mboard. Is everything turning on on the PC, fans etc? Upvote 0 Downvote
AM1 CPU's dont typically need a separate 4 pin power cable, as they are low wattage. They draw the power from the Mboard. Is everything turning on on the PC, fans etc?
T The_dude_abides Reputable Jul 17, 2015 4 0 4,510 Jul 17, 2015 #4 The fans and everything start going, but nothing shows up on screen... I even switched to hdmi from vga and used two different monitors Upvote 0 Downvote
The fans and everything start going, but nothing shows up on screen... I even switched to hdmi from vga and used two different monitors
Someone Somewhere Titan Sep 23, 2012 22,291 8 84,965 Jul 18, 2015 #5 Did you read through the sticky I linked? Upvote 0 Downvote
T The_dude_abides Reputable Jul 17, 2015 4 0 4,510 Jul 18, 2015 #6 Ya I read through that before I posted. I'll try to go through the list again Upvote 0 Downvote