I have Belkin F7D1401 v1 wireless router & I cant access to 192.168.2.1
- Thread starter RaSi FyZy
- Start date
Do a factory reset by holding in the reset button/pin for 30 seconds. Navigate to "http://router" or retry using 192.168.2.1.
If that doesn't work please respond with the color of the blinking light on the front of the unit.
If that doesn't work please respond with the color of the blinking light on the front of the unit.
mcnumpty23
Polypheme
- Jul 15, 2011
- 15,519
- 0
- 66,960
mcnumpty23
Polypheme
- Jul 15, 2011
- 15,519
- 0
- 66,960
your default gateway is blank either manually enter 192.168.2.1
or run these in a command prompt as administrator then restart pc
netsh winsock reset catalog
netsh int ip reset reset.log hit
or run these in a command prompt as administrator then restart pc
netsh winsock reset catalog
netsh int ip reset reset.log hit
Most routers use the 192.168.1.0 or 192.168.0.1 for access to them all the ip addresses will be assigned from that. Usually going up from that address. Belkins router is actually 192.168.2.1 by what they have on their site. Here's a link to get you up and running. http://www.belkin.com/us/support-article?articleNum=8299. I am assuming that you have internet since you are writing on here for answers. Hope this gets you up and running. Let us know if you have problems or if you get up and running.
TRENDING THREADS
-
-
[SOLVED] Is it safe to use a recapped PSU for a long time ?- Started by zwtch_17
- Replies: 7
-
-
-
Discussion What's your favourite video game you've been playing?- Started by amdfangirl
- Replies: 3K
Facebook
Twitter
Instagram