First. This is my first time building a computer. Just putting that out there...now the problem.
My Dram led stays on constantly when I turn it on, I get no screen or anything. Everything seems to boot up fine with the fans and whatnot and I've tried so many dang solutions but I just can't seem to get it to work. When I press the MemOk button the light starts the usual flashing and in the middle of it I get a led going off with the cpu led, it blinks twice once in a while throughout the MemOk process.
I've tried reseting the CMOS, making sure all the connections are plugged in right, making sure all my hardware is compatible, tightened the mobo screws in at an acceptable pressure, tried bios flashback with USB plugged in with the Bios update for my cpu, I've also sent the mobo and cpu back in case they were no good. The RAM I've tried using different sticks, double and single, still nothin
Any help would be GREATLY appreciated
My specs
--
ASUS M5A99FX PRO R2.0 AM3+ AMD 990FX SATA 6Gb/s USB 3.0 ATX AMD Motherboard
AMD FD8320FRHKBOX FX-8320 FX-Series 8-Core Black Edition
G.Skill 8GB (2 x 4GB) DDR3 PC3-12800 1600MHz Ripjaws Series (9-9-9-24) Dual Channel kit
Sapphire Radeon R9 270X 4GB GDDR5
Asus 24x DVD-RW Serial-ATA Internal OEM Optical Drive
Sentey® Power Supply 750w 80 Plus Bronze Modular Mbp750-hm Metal Blade Power 750 Watts / 80 Plus Bronze / 120mm Sleeve Bearing Fan / Hybird Modular / Autoswitching 100-240 Voltage / Active PFC / Single +12v Rail /
Silicon Power 240GB S60 3K P/E Cycle Toggle MLC 2.5" 7mm SATA III 6Gb/s Internal Solid State Drive
Rosewill Gaming ATX Full Tower Computer Case Cases THOR V2-W
--
Thanks
Well then. This is embarrassing. I was reseating the RAM...gave it a little more force and it turns out I wasn't clicking them in all the way, problem solved. Been trying to figure out what was wrong with my setup for almost 2 weeks now....*facepalm*
My Dram led stays on constantly when I turn it on, I get no screen or anything. Everything seems to boot up fine with the fans and whatnot and I've tried so many dang solutions but I just can't seem to get it to work. When I press the MemOk button the light starts the usual flashing and in the middle of it I get a led going off with the cpu led, it blinks twice once in a while throughout the MemOk process.
I've tried reseting the CMOS, making sure all the connections are plugged in right, making sure all my hardware is compatible, tightened the mobo screws in at an acceptable pressure, tried bios flashback with USB plugged in with the Bios update for my cpu, I've also sent the mobo and cpu back in case they were no good. The RAM I've tried using different sticks, double and single, still nothin
Any help would be GREATLY appreciated
My specs
--
ASUS M5A99FX PRO R2.0 AM3+ AMD 990FX SATA 6Gb/s USB 3.0 ATX AMD Motherboard
AMD FD8320FRHKBOX FX-8320 FX-Series 8-Core Black Edition
G.Skill 8GB (2 x 4GB) DDR3 PC3-12800 1600MHz Ripjaws Series (9-9-9-24) Dual Channel kit
Sapphire Radeon R9 270X 4GB GDDR5
Asus 24x DVD-RW Serial-ATA Internal OEM Optical Drive
Sentey® Power Supply 750w 80 Plus Bronze Modular Mbp750-hm Metal Blade Power 750 Watts / 80 Plus Bronze / 120mm Sleeve Bearing Fan / Hybird Modular / Autoswitching 100-240 Voltage / Active PFC / Single +12v Rail /
Silicon Power 240GB S60 3K P/E Cycle Toggle MLC 2.5" 7mm SATA III 6Gb/s Internal Solid State Drive
Rosewill Gaming ATX Full Tower Computer Case Cases THOR V2-W
--
Thanks
Well then. This is embarrassing. I was reseating the RAM...gave it a little more force and it turns out I wasn't clicking them in all the way, problem solved. Been trying to figure out what was wrong with my setup for almost 2 weeks now....*facepalm*
Facebook
Twitter
Instagram