Computer won't start if more than 1 ram stick is pluged in

Keystirras

Reputable
Jul 23, 2015
3
0
4,510
Hello, So let me start off with my computer specs

OS: Windows 8.1 (64 bit)
Motherboard: Gigabyte Z97X-SLI
Processor: Intel I5-4670
BIOS Version: F8
Graphics Card: Asus GT 640
RAM: PNY 8GB XLR8

Okay so onto the story

So i put everything together, it didn't work with more than 1 ram stick, So i updated bios about 3 months later, and all 4 slots worked (Rules out bad ram spot) so i turned my computer off today to go to work, get back from work, and i try turning on my computer and it gets stuck in a boot loop till all but one stick of ram is plugged in. All the ram is the exact same frequency and the motherboard supports the frequency, and i've done a Memtest and everything is fine. Any solutions would be great!
 

MrTuRtLe03

Honorable
Jun 20, 2012
201
0
10,760
Check that the RAM frequencies are set correctly in your BIOS. If they are set to automatic, try manually setting them to whatever speed they are supposed to run at. Also make sure the RAM is in the right order on the board, A1B1A2B2 is normally what most boards are.