I have a Dell 660s and am moving the parts to a larger case with a bigger Power supply. I plan on then buying a graphics card however I am not posting to talk about that. I've already put it all in the new case but the problem I am having is the front slots pattern. The Dell 660s came with a power switch and led combined into one large plug not the standard 2 and 1 pins that came with my antec case.
Sadly I do not own the motherboard manual and do not know the name of said motherboard so it has been difficult to find anything relevant. I have looked at the online manual for 660s, it does not contain the pattern. The online manual does contain a layout for the motherboard if it would help. I attempted the 660 front slots pattern but met blank response. I also tried many variations.
Example of the slot that is to be connected to.
. .
. .
. .
. .
.
. .
I will list off the 1/2 pin cables I have if for some odd reason it is needed.
1 pins
Power Led +, Power Led -,
2 pins
Power switch, H.D.D Led +-, Reset Switch
I will be asleep shortly so I apologize in advance to late replies.
This was edited due to needed saying needes.
Thank you for taking the time to read my pitiful question.
Sadly I do not own the motherboard manual and do not know the name of said motherboard so it has been difficult to find anything relevant. I have looked at the online manual for 660s, it does not contain the pattern. The online manual does contain a layout for the motherboard if it would help. I attempted the 660 front slots pattern but met blank response. I also tried many variations.
Example of the slot that is to be connected to.
. .
. .
. .
. .
.
. .
I will list off the 1/2 pin cables I have if for some odd reason it is needed.
1 pins
Power Led +, Power Led -,
2 pins
Power switch, H.D.D Led +-, Reset Switch
I will be asleep shortly so I apologize in advance to late replies.
This was edited due to needed saying needes.
Thank you for taking the time to read my pitiful question.