Problems when setting timing to the specs from manufacturer

Toggle sidebar Toggle sidebar
J

Juanchioo

Distinguished
Jul 21, 2010
740
0
19,010
Right now i have everything on auto, and it shows 9-9-9-24

My rams are g.skill 2x4gb 1600mhz 7-7-7-21 and i dont know what the command timings are

My motherboard is Asus p8z67v pro/gen3
I tried to manualy put those settings and i had problems when restarting.

Any ideas?

Oh and what are the options below that like secondary or third timings? should i just leave them at auto?

Thank You.
 
Solution
Tradesman1
1333 7-7-7 or can try 1600 at 8-8-8-24 (that might do it for 1600 and will be a little faster than 1333/7 (you had me pulling my hair hair out ;) I ran some 1600/7 sets on that same combo awhile back (was starting to wonder if you had a bad mobo or CPU)
Sort by date Sort by votes
Tradesman1

Tradesman1

Legenda in Aeternum
Jun 5, 2013
67,883
40
126,960
Yes, set the DRAM freq to 1600 and the timings to spec, make sure DRAM voltage is to spec also. Look for Command Rate/Timing - will want it at 2T or may be 2N, then save, exit and give it a try. Leave the secondary and Tertiary timings alone, if need be they should auto adjust
 
Upvote 0 Downvote
J

Juanchioo

Distinguished
Jul 21, 2010
740
0
19,010


looks like mine are 2N but bios doesnt let me input the "N", used only 2 instead, when i use this timings motherboard post says "overclocking fail" or something like that, but it still boots, but if i reset my pc, pc never restarts and it stays on a black screen

pc works fine if i set the timings to auto, but i wanted to get the timings specified on the ram
 
Upvote 0 Downvote
Tradesman1

Tradesman1

Legenda in Aeternum
Jun 5, 2013
67,883
40
126,960
1333 7-7-7 or can try 1600 at 8-8-8-24 (that might do it for 1600 and will be a little faster than 1333/7 (you had me pulling my hair hair out ;) I ran some 1600/7 sets on that same combo awhile back (was starting to wonder if you had a bad mobo or CPU)
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom