NZXT Kraken X61 Issues

jaall

Distinguished
Jul 25, 2009
4
0
18,510
I bought an X61 Kraken a week ago, all fitted fine and working. I then decided to do a bit of cable management and unplugged everything, but now since putting it all back together it no longer reads the CPU fan speed and I have been having issues with my PC booting which I believe may be caused by this.

I have checked and it definitely is connected to the "CPU_FAN" header on the motherboard, and it's not a dodgy pin as I connected a separate fan to check it, and it reads it fine. Could this be a driver issue of some sort and if so how would I go about re-installing it? Thanks!
 
Solution
Have you tried running the Kraken Chipset driver install utility? It's located in C:\Program Files (x86)\NZXT\CAM\KrakenChipsetDriver. Run "InstallKrakenChipsetDriver" and restart PC. Let me know if it works man. Good luck!

Shawn_Young

Reputable
Aug 15, 2015
4
0
4,520
Have you tried running the Kraken Chipset driver install utility? It's located in C:\Program Files (x86)\NZXT\CAM\KrakenChipsetDriver. Run "InstallKrakenChipsetDriver" and restart PC. Let me know if it works man. Good luck!
 
Solution

jaall

Distinguished
Jul 25, 2009
4
0
18,510


Unfortunately it hasn't worked. I was pretty sure I installed the chipset before, but ran it again to check. The run screen appeared and the line flashed a couple of times and then closed which says to me that it didn't do anything. I tried restarting just in case but still having the same issue. Thanks anyway for the suggestion!