L loganpulse Reputable Apr 17, 2015 85 0 4,630 Aug 6, 2015 #1 here is my build. http://nz.pcpartpicker.com/p/LCnhXL everytime i line up motherboard it wont fit. i have the io all together but wont line up ?
here is my build. http://nz.pcpartpicker.com/p/LCnhXL everytime i line up motherboard it wont fit. i have the io all together but wont line up ?
M MtthewGervasi Reputable Jul 9, 2015 99 0 4,660 Aug 6, 2015 #2 make sure your standoffs are in the right place and make sure you are using the right holes. Upvote 0 Downvote
L loganpulse Reputable Apr 17, 2015 85 0 4,630 Aug 6, 2015 #3 MtthewGervasi : make sure your standoffs are in the right place and make sure you are using the right holes. the 300r has built in standoffs Upvote 0 Downvote
MtthewGervasi : make sure your standoffs are in the right place and make sure you are using the right holes. the 300r has built in standoffs
M MtthewGervasi Reputable Jul 9, 2015 99 0 4,660 Aug 6, 2015 #4 Then it should fit, call me stupid or dumb, but check to see if your IO plate is the right way in. Upvote 0 Downvote
L loganpulse Reputable Apr 17, 2015 85 0 4,630 Aug 6, 2015 #5 MtthewGervasi : Then it should fit, call me stupid or dumb, but check to see if your IO plate is the right way in. fixed it, just had to push it in the ip panel a bit harder. Upvote 0 Downvote
MtthewGervasi : Then it should fit, call me stupid or dumb, but check to see if your IO plate is the right way in. fixed it, just had to push it in the ip panel a bit harder.
L loganpulse Reputable Apr 17, 2015 85 0 4,630 Aug 6, 2015 #6 MtthewGervasi : Then it should fit, call me stupid or dumb, but check to see if your IO plate is the right way in. fixed it, just had to push it in the ip panel a bit harder. Upvote 0 Downvote
MtthewGervasi : Then it should fit, call me stupid or dumb, but check to see if your IO plate is the right way in. fixed it, just had to push it in the ip panel a bit harder.
M MtthewGervasi Reputable Jul 9, 2015 99 0 4,660 Aug 6, 2015 #7 loganpulse : MtthewGervasi : Then it should fit, call me stupid or dumb, but check to see if your IO plate is the right way in. fixed it, just had to push it in the ip panel a bit harder. Good, Glad i could be of limited assistance Upvote 0 Downvote
loganpulse : MtthewGervasi : Then it should fit, call me stupid or dumb, but check to see if your IO plate is the right way in. fixed it, just had to push it in the ip panel a bit harder. Good, Glad i could be of limited assistance