pc wont start after cpu swap

Toggle sidebar Toggle sidebar
R

Regret696

Reputable
Aug 4, 2015
20
0
4,510
Hi all,

I swapped my cpu out yesterday and now my pc wont boot up anymore.. it gives me a beep code. I have a gigabyte motherboard GA-MA790X-UD4 running the F3 bios(the one is needed for.my cpu)I'll link to a video where you can hear the beeps.

Im afraid i fried my mobo but i hope its just a wire thats not connected properly(first time taking an entire motherboard out)

Thanks in advance and i hope you guys can help :D


https://m.youtube.com/watch?v=dOfVUMgwAok
 
Solution
maxalge


1 long 2 short means video error


check you didnt knock the card loose from the slot or unplugged a pcie cable and that the monitor is actually plugged in


also could be conductive paste dropping into the cpu pins or some such


use mx-4 non conductive for example
Sort by date Sort by votes
maxalge

maxalge

Champion
Ambassador
May 31, 2012
13,373
4
56,960


1 long 2 short means video error


check you didnt knock the card loose from the slot or unplugged a pcie cable and that the monitor is actually plugged in


also could be conductive paste dropping into the cpu pins or some such


use mx-4 non conductive for example
 
Upvote 0 Downvote
Solution
maxalge

maxalge

Champion
Ambassador
May 31, 2012
13,373
4
56,960


what thermal paste did you use to install the new cpu?


if it is conductive dropping some on the motherboard or getting some under/around the cpu will also cause this



Which cpu specifically did you install?
 
Upvote 0 Downvote
R

Regret696

Reputable
Aug 4, 2015
20
0
4,510


 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom