POST beep but no video output

Toggle sidebar Toggle sidebar
G

Guest

Guest
I had just finished this build yesterday but when I try to get it to the BIOS I get a single beep but no signal on monitor, I have tried all the recommended steps but I still get nothing. When I connect the hdmi to the mobo instead of the GPU my monitor recognizes it as a source but there is no video output(since there is no intergrated graphics).


Specs: Mobo : Gigabyte F2A88X-D3H
CPU : Athlon x4 860k
GPU : XFX One R ( HD 5450)
RAM : 8GB HyperX Fury 1866mhz
PSU : FirePower ZT 750W
 
Sort by date Sort by votes
AntonyLovric

AntonyLovric

Distinguished
Aug 4, 2014
378
34
19,040
This board apparently uses an AMI bios:
http://hu.gigabyte.com/products/page/mb/ga-f2a88x-d3hrev_30/specs/

From their support documentation:
http://www.gigabyte.com/support-downloads/faq-page.aspx?fid=816

...this sounds like a memory error (see below).


1.AWARD BIOS
1 short beep ：System normal
2 short beep ：CMOS Error
1 long beep and 1 short beep：Memory error
1 long beep and 2 short beep：Graphic card error
1 long beep and 3 short beep ：AGP error
1 long beep and 9 short beep ：Memory Error
Continuous long beep ：Memory not correctly installed
Continuous short beep ：Power supply unit failed

2.AMI BIOS
*** 1 short beep ：Memory Error ***
2 short beep：Memory parity check error.
3 short beep ：basic memory 64K address check error
4 short beep ：Real Time Clock malfunction .
5 short beep ：CPU error
6 short beep：Keyboard error
7 short beep ：CPU interruption error
8 short beep：Graphic card error
9 short beep ：Memory error
10 short beep ：CMOS error
11 short beep ：CPU cache memory malfunction

Cheers
Antony

 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom