stupid question about nzxt h440
- Thread starter MrKino
- Start date
Solution
mudpuppet
Honorable
- Jun 20, 2012
- 747
- 0
- 11,360
It'll closes easily, they are little plastic push pins but not hard too hard to puch back down. Same with the front panel. Use the little lip for some leverage or get under the pins from the inside of the case and squeeze it (It'll make more sense if you look at it.).
mudpuppet
Honorable
- Jun 20, 2012
- 747
- 0
- 11,360
Correct.
Edit: To expand a little, there are little fan mounting holes up top, similar to that of the rear fan, for 120mm or 140mm fans. The fans are inside the case, but screw TO the case from the top. The lid has some room for air to be exhausted from the top of the case as well as some sound dampening foam to reduce noise.
Edit: To expand a little, there are little fan mounting holes up top, similar to that of the rear fan, for 120mm or 140mm fans. The fans are inside the case, but screw TO the case from the top. The lid has some room for air to be exhausted from the top of the case as well as some sound dampening foam to reduce noise.
TRENDING THREADS
-
-
-
Question gpu hotspot temperature reaches 110c. is it normal?
- Started by eziowar
- Replies: 9
-
-
Question Need help fixing Blank screen Secondary Monitor- Started by BlueDolphin69
- Replies: 4
-
RTX 4060 Ti vs RX 7700 XT faceoff: Which midrange graphics card is superior?- Started by Admin
- Replies: 17
-
Facebook
Twitter
Instagram