I recently installed 3 120mm fans to my computer. I installed speedfan too check the speeds. In the list it shows fans 1-5. 1 and 2 are running fine, but fans 3-5 are showing 0rpm (The ones I just installed). What can I do to get these fans running properly? My temperatures are getting hot for temp3 and core around 140-150. My other temps are in healthy range. My motherboard is gigabyte m68mt-s2p. 8gb ram, 2 hd 1tb and 3tb.
-
Multi-million dollar Cheyenne supercomputer auction ends with $480,085 bid — buyer walked away with 8,064 Intel Xeon Broadwell CPUs, 313TB DDR4-2400 ECC RAM, and some water leaks
Solution
getochkn
Polypheme
- Jul 2, 2006
- 12,407
- 54
- 65,040
Maybe speedfan isn't reading right. ARe they phsyically spinning? If so, then obviously speedfan is wrong.
Are they 3 pin fans in a 4 pin port or vice versa? Motherboards sometimes let you in the BIOS set if there are 3 or 4 pin fans hooked up and mixing the two can result in bad RPM readings.
Are they 3 pin fans in a 4 pin port or vice versa? Motherboards sometimes let you in the BIOS set if there are 3 or 4 pin fans hooked up and mixing the two can result in bad RPM readings.
Thanks. I forgot to add that when I feel 80mm fan thats hooked to my motherboard, I can feel a good breeze coming from it. When I feel the 120mm fans that are spinning and lit up, they don't have the same strength of airflow that the 80mm has. The 120mm are connected through the molex cables.
TRENDING THREADS
-
-
Question How to maintain a GPU for as long as possible ?- Started by martinmigeot
- Replies: 5
-
News Apple debuts M4 processor in new iPad Pros with 38 TOPS on neural engine- Started by Admin
- Replies: 76
-
News Firefox user loses 7,470 opened tabs saved over two years after they can’t restore browsing session
- Started by Admin
- Replies: 58
Facebook
Twitter
Instagram