New PC build wont connect to any monitor

Toggle sidebar Toggle sidebar
J

Johnsmith1173

Reputable
Aug 9, 2015
12
0
4,510
Okay I built my own PC over the last day and once it was all said and done i go to connect it to a monitor and I get no signal. I checked all the power chords and things like that to make sure they were in the right spot and tight and still nothing.
My specs are
AMD FX-4350 4.2GHz Quad-Core Processor
Gigabyte GA-78LMT-USB3 Micro ATX AM3+ Motherboard
G.Skill Ripjaws X Series 8GB (2 x 4GB) DDR3-1866 Memory
Seagate Barracuda 1TB 3.5" 7200RPM Internal Hard Drive
EVGA GeForce GTX 750 Ti 2GB Superclocked Video Card
Inwin GT1 White ATX Mid Tower Case(as if it matters)
FSP Group 650W 80+ Silver Certified ATX Power Supply
Asus DRW-24B1ST/BLK/B/AS DVD/CD Writer

Hope that helps if you have any ideas at all please comment thanks a bunch!

PS. When i do connect to a monitor I get no signal then it shuts back off.
 
Sort by date Sort by votes
smorizio

smorizio

Titan
Jan 22, 2010
30,984
9
125,315
if your mb is the 4.1 rev make sure it has the f3 bios or f4. the f3 is needed to post that cpu. check that the mb not grounded out to the case and all of the plugs are connected. some vidoe cards need 6 pin power make sure your is connected if needed. try one ram dimm.
 
Upvote 0 Downvote
J

Johnsmith1173

Reputable
Aug 9, 2015
12
0
4,510


Yea still nothing is working been trying this shit for 9 hours today and no luck with anything id like to smash the thing tbh.
 
Upvote 0 Downvote
smorizio

smorizio

Titan
Jan 22, 2010
30,984
9
125,315
take the mb out of the case and with one ram dimm and the power supply see if it turns on. if nothing happens. unplug the power supply and jumper the green to black wire see if it turns on. if the system boots outside the case then see if it was shorting out.
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom